A porcelain figure is a different problem from a porcelain vase. A vessel is thrown on a wheel and closed by a single movement of the hand; a figure has to be built in parts, joined while the clay is still soft, dried without cracking and fired without slumping. Buddhist figures are the largest and most demanding group within that category, and they are also the most frequently restored.
This guide covers who the figures represent, how they were made at Dehua and Jingdezhen, how the two traditions differ, and what to check before buying one.
Why Figures Are Different
Throwing cannot produce a face, a hand or a fold of drapery. Figures were made by pressing clay into piece moulds, removing the parts, joining them with slip, retouching the joins by hand and adding details u2014 fingers, ribbons, attributes u2014 before drying. Large figures were hollow, built up in sections with an opening left at the back or beneath, so that the walls could be supported and the piece could dry evenly.
Firing is where the difficulty lies. A thick foot and a thin wrist dry and shrink at different rates, so the join between them cracks; a raised arm or a halo has nothing beneath it to carry its weight when the clay softens, so it needs a prop inside the kiln that is removed afterwards and leaves a scar. A figure that survived the kiln intact was, in a real sense, lucky.
Who the Figures Are
| Figure | How to recognise it | Usual period |
|---|---|---|
| Shakyamuni Buddha | Seated on a lotus, right hand touching the earth or in meditation, ushnisha on the head, plain monastic robe | Song onward; most common in Ming and Qing |
| Guanyin | Bodhisattva in flowing robes, high chignon or crown, often holding a vase or a willow branch; seated in “royal ease” or standing on a lotus | Song to Qing; the most common porcelain figure of all |
| Maitreya | Seated, laughing, with a cloth bag; in China often the “laughing Buddha” form | Ming and Qing |
| Arhats | Groups of bald monks with individual expressions and attributes, often in sets of sixteen or eighteen | Ming and Qing; large sets under Qianlong |
| Wenshu and Puxian | Bodhisattvas riding a lion and an elephant respectively, often paired | Ming and Qing |
| Weituo | Armoured guardian with a club, standing at attention | Ming and Qing |
| Heavenly Kings | Four armoured guardians, fierce expressions, trampling demons | Ming and Qing |
The attributes are the fastest way to identify a figure and the first thing to check for loss. A Guanyin without her vase, an arhat without his animal or staff, a Wenshu without his lion: the missing element is often a replacement made in resin and painted to match.
How They Were Made
The standard method was piece-moulding. A model was carved in wood or clay, and plaster moulds were taken from it in sections. Clay was pressed into each mould, the sections were joined with slip, and the seams were smoothed by hand before the piece dried. Smaller figures could be press-moulded in two halves; larger ones were built from a dozen or more parts.
Two finishing routes followed. The first was a glazed finish: the whole figure was covered in a monochrome glaze and fired once, which is the Dehua approach. The second was a bisque body with colour applied over it, either as underglaze blue or as low-temperature enamels, which is the Jingdezhen approach for polychrome figures. In the second case the face and hands were often left unglazed and painted in skin tones after firing.
Cold painting, applied after the glaze firing, does not fuse with the surface. It flakes, darkens and wears away at the high points u2014 which is why so many surviving figures have lost eyebrows, lips and the finer details of the eyes.
Dehua and Jingdezhen: Two Answers
Dehua, in Fujian, produced the finest white porcelain figures in China, known in the West as blanc de chine. The body is dense, slightly creamy and translucent; the glaze is a warm ivory white that pools in the folds of drapery and softens every edge. The best pieces are modelled with extraordinary delicacy u2014 the fingers, the ribbons, the folds of a sleeve u2014 and fired without added colour, so that the form has to carry everything.
Jingdezhen answered with colour. Figures were glazed, painted with enamels or with underglaze blue, and often assembled into groups on a base. The modelling is bolder and the surfaces busier; the effect is theatrical where Dehua is contemplative.
| Dehua blanc de chine | Jingdezhen polychrome | |
|---|---|---|
| Body | Dense, creamy white, translucent | Whiter, often thicker |
| Glaze | Ivory, pooling in folds, unctuous | Clear or bluish, sometimes left unglazed on face and hands |
| Colour | None, or a very slight tinge | Enamels, underglaze blue, gilt |
| Modelling | Fine, restrained, emphasis on drapery | Bolder, more decorative, often with a base or group |
| Typical size | Small to medium, up to about 60 cm | Small to very large; temple sets can exceed a metre |
| Usual function | Domestic altar, scholar’s table, export | Temple, monastery, imperial commission |
| Dating evidence | Seals and hallmarks, especially He Chaozong | Reign marks, style of enamelling, base construction |
Guanyin and the Feminine Form
Guanyin is the figure most often made in porcelain, and her iconography changed more than any other. Song and Yuan examples are often seated in royal ease, with a calm, inward expression and a simple crown. Ming figures grow taller and more ornate, with elaborate crowns, beaded necklaces and long ribbons falling to the base. The “Guanyin of the South Sea” u2014 standing on a wave base with a dragon or a fish beneath her u2014 becomes a standard in the Qing.
The most admired Dehua Guanyin are those attributed to He Chaozong, a sixteenth-century modeller whose figures are marked with a gourd-shaped seal or a square seal on the back. His drapery has a particular weight: the cloth falls in long, uninterrupted curves, and the hands are modelled rather than suggested. Genuine He Chaozong pieces are rare; the seals are among the most frequently copied marks in Chinese porcelain.
The Guanyin with a child, sometimes called the “child-giving Guanyin”, is a separate type that becomes common in the Qing and was widely exported. It is a domestic figure rather than a temple one, and it is usually smaller and more simply finished.
Dating and Marks on Figures
Reign marks on figures are less reliable than on vessels, because figures were often made in workshops outside the imperial system. What dates them is construction and style: the way the base is closed, whether the interior is hollow and roughly finished, how the hands are attached, and whether the drapery was modelled or moulded.
Look at the back of a figure first. Temple figures usually have a large unglazed opening at the back, sometimes with a wooden plug; domestic figures are closed. Look at the base: a flat, unglazed base with a fabric impression suggests a moulded piece; a neatly glazed base with a foot ring suggests a better workshop. Look at the joins: a genuine early figure has seams that have been smoothed by hand, not erased by a mould.
Style is the final guide. The face of a Kangxi Guanyin is fuller than a Qianlong one; the eyebrows of a nineteenth-century figure are often painted in a hard, symmetrical arc that reads as mechanical rather than modelled.
What to Check Before Buying
Figures suffer from a predictable set of repairs, and a buyer who knows them can read a piece in a few minutes.
- Hands and fingers. The most fragile part, and the most often replaced. Compare the glaze and the modelling of the hand with the sleeve.
- Halo and attributes. Detachable elements are frequently lost or substituted. Check that the attachment points are original.
- Head and neck. A reattached head shows a line at the neck that does not follow the modelling, and often a slight mismatch in glaze colour.
- Cold paint. Losses on the face, lips and eyes are normal at age; over-painting with modern acrylic is not.
- Firing cracks. Cracks that run through a thick section are often original and stable; cracks filled with coloured wax are not.
- Base and stand. A figure and its fitted stand should share wear, colour and age. A marriage of two pieces is common.
Frequently Asked Questions
What is blanc de chine?
The Western name for the white porcelain made at Dehua in Fujian from the Ming dynasty onward. It is a dense, creamy, translucent body with an ivory glaze, used mainly for figures and small vessels.
How can I tell if a Guanyin figure is old?
Check the construction rather than the mark: the way the base is closed, the hand-smoothed seams, the thickness of the walls and the wear on the cold-painted face. Old figures show uneven wear; modern copies are either uniformly clean or uniformly aged.
Were porcelain Buddhist figures used in temples?
Yes, especially large Jingdezhen sets of arhats and guardians. Smaller Dehua figures were more often used on domestic altars, on a scholar’s desk or made for export.
Why do so many figures have damaged hands?
Because hands are thin, unsupported and the last part of the figure to be finished. They break in the kiln, in transit and in cleaning, and they are the first element a restorer replaces.
Related Reading
For the material itself, read Earthenware vs Stoneware vs Porcelain and How the Jingdezhen Porcelain Body Is Made. For the sculptural tradition at Jingdezhen, see What Is Fahua Porcelain?, and for the wider Song context, the five great Song wares.
Our own work is high-fired Jingdezhen porcelain; browse the collection, or email us. We also answer questions on WhatsApp.
