Jingdezhen Heritage · Artwork & Craft

,

Ceramic Trend Toys: Inside Jingdezhen’s Forty-Metre Bowl

By Jingdezhen Heritage · Published October 28, 2026 · Updated November 16, 2026 On the western edge of Jingdezhen stands a building shaped like a bowl: forty metres high, eighty metres across the rim, large enough to be seen from the ring road. It is listed as the world’s largest ceramic-bowl structure, and since 2023…


coil-building

On the western edge of Jingdezhen stands a building shaped like a bowl: forty metres high, eighty metres across the rim, large enough to be seen from the ring road. It is listed as the world’s largest ceramic-bowl structure, and since 2023 it has been the centre of an experiment that few outside China have noticed u2014 the industrial-scale marriage of porcelain and the designer toy.

1. The Building Itself

The form is not arbitrary. The architects took the profile of a du01d2ulu00ec wu01cen (u6597u7b20u7897, “conical hat bowl”) u2014 the wide, thin-walled tea bowl made at the Hutian kilns in the Song dynasty and covered in yu01d0ngqu012bng (u5f71u9752) glaze, a pale blue-green that pools in the carved decoration. Blown up roughly four hundred times, the same curve becomes an architectural shell.

Element Detail
Height 40 m
Rim diameter 80 m
Design reference Song dynasty Hutian yu01d0ngqu012bng conical hat bowl
Built / opened Completed 2017, opened May 2017
Record Listed as the largest ceramic bowl structure in the world
Location Changnanli, Changjiang District, Jingdezhen

For its first six years the building was a landmark without an economy around it. Visitors came, photographed the bowl and left; the surrounding units stayed empty. The turning point came in 2023, when the district took the site over with state investment and redefined it u2014 not as a museum of porcelain, but as a cluster for ceramic trend toys.

2. What a “Ceramic Trend Toy” Is

The category is new enough that no dictionary definition exists, and the workshops themselves describe it loosely. In practice it means a small, collectible, character-led ceramic object: a figure, an animal, a miniature vessel used as a character, produced in a limited run, sold to people who display it rather than use it.

The distinction from traditional porcelain figurine work is not the material but the design source. A Dehua Guanyin begins with a religious or decorative model. A ceramic trend toy begins with a two-dimensional character u2014 an illustration, a game asset, a mascot u2014 which then has to be translated into clay, glaze and fire without losing the character’s identity. The whole difficulty lies in that translation, because glaze does not behave like ink.

In this sense the building’s reference is not decorative. A Song tea bowl was also a designed object made in quantity, judged on proportion and surface rather than on ornament, and it is the closest thing Chinese ceramic history offers to a “product”.

3. From Landmark to Cluster

Between 2023 and 2026 the site filled with tenants that are mostly not ceramic studios in the traditional sense: a digital culture museum run by the national broadcaster, design centres attached to art academies, an IP centre called Yu00f3ujiu00e0n Du014dngfu0101ng (u91c9u89c1u4e1cu65b9, “glaze meets the East”), a Shanhaijing character studio, and a Shenzhen-based art centre. The reported figures give a sense of scale:

Measure Reported figure
Designers and artists working on site more than 5,000
Domestic and international IP brands more than 200
Social investment in the cluster over u00a5700 million
Value of incubated products over u00a52 billion

These are the organisers’ own numbers and should be read as such, but the tenant mix is verifiable, and it explains the model. A designer arriving with a character does not have to find a kiln, a mould-maker, a glaze chemist and a painter separately. All four are within walking distance, which is precisely what Jingdezhen has offered since the Ming dynasty and what most design cities cannot offer at all.

4. Miffy in Porcelain

The clearest illustration is the seventieth birthday of Miffy, the Dutch rabbit drawn by Dick Bruna. In 2025 the character was given a ceramic wardrobe made on site: underglaze cobalt linework for the outlines, lu00ednglu00f3ng (u73b2u73d1) pierced work for the lighter passages, and overglaze enamel for the colour. The results u2014 a Miffy enamel afternoon-tea set and a Miffy garden mug gift box u2014 are recognisably the original character and unmistakably Jingdezhen in surface.

The technical interest is in the sequence. Cobalt outlines are painted on the unfired or bisqued body and sealed under a clear glaze at roughly 1300 u00b0C; the enamel colour is applied over the fired glaze and re-fired at 700u2013800 u00b0C; pierced lu00ednglu00f3ng panels are cut through the wall before glazing, so the glaze has to bridge the openings without filling them. Each stage can destroy the work of the one before, and a small figure has less margin than a vase: a hand, an ear, a raised tail is a thin section that must survive three firings.

5. “Ceramic Punk” and the Standards Question

The site’s own intellectual framing is a term it promotes heavily: tu00e1ocu00ed pu00e9ngku00e8 (u9676u74f7u670bu514b, “ceramic punk”), used to describe work that treats porcelain as a medium for subcultural and street-influenced design rather than for classical ornament. Its mascot, a character called Changnanzai, has appeared at provincial football matches and at the site’s opening events. Whether the label will survive is doubtful; what matters commercially is that it gives designers a permission structure to use porcelain without deferring to imperial models.

More consequential is the standards work. In July 2025 the site hosted a seminar on design and production standards for ceramic trend toys, bringing together the UNESCO chair in ceramic culture, the ceramic branch of the national intangible heritage association, the Chinese Academy of Social Sciences, and designers, universities and toy companies. A consensus document and white paper followed.

The gap being filled is real. A resin toy has published tolerances for paint adhesion, joint strength and small-part safety. A glazed ceramic figure has none of these, and no accepted way to grade a run: how much variation in glaze colour is acceptable, how a chipped ear is classified, whether a 5 mm difference between two examples of the same model is a defect or evidence of handwork. Without agreed answers, “limited edition ceramic” is a marketing phrase rather than a specification.

6. The Market Behind It

The commercial logic is straightforward. According to the 2025 trend-toy overseas market report cited by the site, the global market reached an estimated US$41.8 billion in 2024, with the Chinese market above u00a576.4 billion and forecast to pass u00a5110 billion by 2026. The buyer profile is young, and the purchase is driven by display and identity rather than utility.

The most telling deal is with ToyCity, a Dongguan brand known for resin figures. Its characters are being reissued as ceramic collector’s editions. The reported result: priced above the original resin release, the ceramic versions sold out. That is the market signal the cluster was built to capture u2014 a willingness to pay a premium for the same character in a material that carries craft value, history and a degree of uncontrollability.

7. What to Look For

For a buyer, the useful question is not whether a piece is “official” but whether the ceramic work was done to a standard the character deserves.

Criterion Stronger Weaker
Line work Painted cobalt or enamel line, slight variation in pressure Printed decal outline, uniform to the point of flatness
Pierced work Cut through the wall, glaze bridged across the opening Printed pattern imitating openwork
Enamel Built up in layers, slight relief, colour sitting on the glaze Thin, flat colour; edges bleeding into the outline
Underside Clean foot, maker’s mark, edition number Unmarked, glaze runs over the foot
Consistency Matched within a stated tolerance across the run Visible colour shift between examples, unexplained
Attribution Named studio, named painter or modeller IP brand only, no ceramic maker disclosed

Frequently Asked Questions

Are these toys or collectibles?

Both, in the way that a limited-edition print is both a poster and a collectible. The material and the firing make them fragile for play; the edition size and the design make them objects of display.

Why does ceramic cost more than resin?

Because the failure rate is higher and each piece passes through more hands: modelling, mould-making, casting or press-moulding, joining, glazing, painting and two or more firings. A run of fifty is fifty individual firings, not one mould cycle.

Does the “largest bowl” record matter?

Only as a landmark. What matters is that the building put a production cluster u2014 mould-makers, glaze specialists, painters, IP licensors u2014 within a few hundred metres of each other, which is the actual competitive advantage.


Related Reading

The collaboration model behind these pieces u2014 Pop Mart with Jingdezhen workshops, Beijing intangible-heritage masters with WAKUKU u2014 is examined in Intangible Heritage and Trend Toys: How Old Crafts Reach Young Buyers. For the sculptural tradition these designers are drawing on, see Ceramic Sculpture Art: Forms, Kilns and Materials and Statuary Porcelain: Form and Painted Surface.

To see hand-modelled figures from our own studio, browse the collection, or email us about a commission. We also answer questions on WhatsApp.


Enquiries

Ask us about this artwork

For current availability, additional photographs, international shipping or a custom commission, please contact us directly.